• 界首一中64届学子毕业54年后母校再相聚 2019-08-24
  • 韩国:关注平昌冬奥会——朝啦啦队抵达  韩方举办欢迎晚宴 2019-08-24
  • 认识【转基因的各种破坏力】,其实很简单,只需【化验员】扒开种植【转基因农作物】的【泥土】,拿到【化验室】在【显微镜】下面看一看其【泥土】里面还有没有【微生物】的 2019-08-18
  • 凤凰月报:5月高端成交活跃带动均价创新高 ——凤凰网房产上海 2019-08-15
  • 木有评论的价值,逗逗你这猴崽子。[哈哈] 2019-08-15
  • 上海二手车牌照暴涨至12万 免费新能源牌乏人问津 2019-08-06
  • 四川郎酒股份有限公司获第十二届人民企业社会责任奖年度环保奖 2019-07-21
  • 欧宝将会在今年推出全新GT概念车 2019-07-21
  • 衔接“新高考” 要求变更高 2019-07-15
  • 杨洋出演《全职高手》 直言:叶修是很多人的榜样 2019-06-09
  • “全能神”人员恶意使用难民申请滞留韩国 2019-06-08
  • 临汾“尧王杯”马拉松激情开赛 万名选手齐聚华门广场 2019-06-08
  • 回复@笑傲江湖V:七千二百多吧。 2019-06-07
  • 【理上网来·辉煌十九大】德国北威州经济部长:十九大报告表明中国有能力为世界做出更多贡献 2019-06-06
  • 办个房产证 也要惊动省委书记? 2019-06-05
  • Language
    中文 ENGLISH ??????? espa?ol
    Phone:0538-6958906
    Menu
    Products PRODUCT DISPLAY

    淘宝快3和值走势图 www.xxmgf.tw

    Automatic gypsum block production line

    Product Details


    With an annual output of 200,000 square meters gypsum block production line


    Process plan and investment estimates

    First, the gypsum block
        Gypsum block is building gypsum as the main raw material, by adding water, casting and drying and made of block light construction gypsum products. In the production according to the performance requirements can also be added to light aggregate, fiber reinforced materials, foaming agents and other auxiliary materials. Sometimes some high strength gypsum (α half water gypsum) can be used instead of building plaster.
        The shape of the gypsum block is a flat rectangular parallelepiped, and the dowels and grooves are provided in the vertical and horizontal sides. In addition, gypsum block can be divided into solid and hollow block two categories.
        According to the draft international standards, gypsum block length should not be greater than 700mm, block height should meet the block surface area of not less than 0.25m2, thickness of 60 ~ 150mm. Recommended block size: length of 666mm, height of 500mm, thickness of 60mm, 70mm, 80mm and 100mm, that is, three blocks composed of 1m2 wall.
        Gypsum block is mainly used for frame structure and other structural construction of non-load-bearing walls, generally used as a partition wall. If the appropriate fixed and support structure, the wall can also withstand heavier loads (such as hanging cabinets, water heaters, bathroom appliances, etc.). Dust-proof blocks that incorporate special admixtures can be used in bathrooms, bathrooms, etc. are not persistent wet conditions.
        Gypsum block with light weight, size, fire, earthquake, thermal insulation, adjust the indoor dry and dry, excellent processing performance and ease of construction, etc., is the focus of the national application of environmental protection, energy-saving green products.


        Third, the process program:
        1. Product specifications (length × width × thickness):
        666 × 500 × 100 (real, hollow)
        Hollow rate:32%
        2. Product performance (JC / T 698-1998 "gypsum block"):
        Air insulation:40.5dB
        Fire resistance:186min
        Flatness:≤0.5mm/m2
        Breaking load:≥4.0Kn
        3.product quality:
        Meet or exceed the building materials industry "gypsum block" standard (JC / T 698-1998) requirements。
        4. Production design:
        The whole production line adopts 16-chamber block unit design. The designed output is: 16 cavity × 0.333 m2 / block × 6 mode / hour × 24 hours / day × 300 days = 230,000 m2 / year。

      五、Production line equipment details and investment estimates:

    Serial number

    Device name

    Specifications Model

    unit

    Quantity

    Manufacturer

    Remarks

    1

    Storage warehouse 60m3

    station

    1

    production on spot

    We provide drawings

    2

    Hoist TH250×10m

    station

    1

         

    Paste powder into the warehouse

    3

    Screw conveyor
    LS250×6m

    station

    1

     

    Ointment into the workshop

    4

    Additives 5m3

    station

    2

    production on spot

    We provide drawings

    5

    Screw conveyor
    LS250×4m

    station

    1

     

    self-buy

    6

    Electric hoist 2t

    station

    1

     

    Additives to enhance

    7

    Rigid impeller feeder 400×400

    station

    3

     

    self-buy

    8

    Buffer warehouse 3m3

    station

    2

    production on spot

    We provide drawings

    9

    Equipment frame and platform  

    set

    1

    production on spot

    We provide drawings

    10

    Powder metering system  

    set

    1

    Tai'an force to the Electrical and Mechanical Technology Co., Ltd

    With pneumatic butterfly valve

    11

    Water metering system  

    set

    1

    stainless steel

    12

    Mixer  

    station

    1

    stainless steel

    13

    Forming Machine 16Cavity

    station

    1

    Hard chrome plated on the surface

    14

    Scraper  

    station

    1

     

    15

    Central hydraulic station  

    station

    1

     

    16

    Pneumatic telescopic fixture  

    station

    1

     

    17

    Air compressor  

    station

    1

     

    18

    Automatic control system  

    set

    1

     

    19

    Forklift fixture  

    station

    1

     

     



      六、Production site requirements:
        1.Production workshop
        18 meters long, 12 meters wide, 8 meters high, the use of light steel structure plant.
        2.Product warehouse
        6 meters high, covering 500 square meters.
        3. Drying the site
        Open air, ground hardening, covering an area of 3000 square meters.

    Product Parameters

    Major equipment technical specifications and performance parameters:
        1. Dosing system: by the water metering device, powder metering device, compressed air system and rack and so on.
        A. The water metering device includes a stainless steel bucket 2, an inlet pipe, a shut-off valve, a solenoid valve, an adjustable water level transmission device, an adjustment chain 24, an overflow pipe 21, a pneumatic drain valve 23, and a mixer top cover Drain hose 22 and so on. Which barrel effective volume 450L, water adjustment range of 200 ~ 450L.
        B. Powder metering device: by the anti-stick coating with electronic scale weighing bucket 4, electronic sensors, vibrators, pneumatic discharge valve 26, weighing the display, electronic control devices and other components. Which hopper effective volume of 400L, the maximum weighing 500Kg, measurement accuracy of 4 scales tolerance.
        C. Compressed air system: including a full set of air compressor, air handling components, hard and soft pipes, equipped with release agent cylinder guns and nozzles. The system is used for purging the mixer and molding machine cavity, spray mold release agent and the electronic scale, water system discharge material with water. Which displacement 0.3m3 / min, storage tank volume 0.125m3, motor power 3KW.
        D. Rack: fixed the above-mentioned various devices and easy maintenance.
        2. Mixer
        By the mixer frame, stainless steel mixing barrels 14, stainless steel can open the top cover 20, installed in the top of the water pipe, with the motor mixer 19 and pouring cylinder 17 and other components.
    Mixer mixer for the two, mixing head using high-speed pulp. The top cover of the machine has a stainless steel ring water pipe, the water evenly sprayed into the barrel of the Ministry. The top cover can be opened automatically to facilitate worker operation. Barrel maximum volume of 800L, with automatic hydraulic pouring body and pour the material when the automatic opening mechanism.
        3. Molding machine
        In addition to the characteristics of the mold has been described in addition to the principle of mold design, but also includes the installation on both sides of the mold, located in the cavity above the hydraulic forming scraper, with a sealing device at the end of mold, in addition to the rack, , Beams, columns, the main cylinder, plug, send devices and other parts.
    Mold material using alloy steel surface plating a sufficient thickness of hard chrome, and by mirror polishing and high manufacturing accuracy and block size can be fine-tuned structure to ensure that the system was made of high precision, high surface finish and mold use Long life.
        The use of hydraulic automatic scraper device can automatically form a block on the mouth, is conducive to ensuring product quality, reduce labor intensity and to achieve automation.
        Gypsum block specifications: 500mm × 600mm × 80mm
        Number of cavities: 16
        Maximum ejection force: 1350KN
        With hydroforming scraper
        With bottom die seal
        4. Central hydraulic station
        Including high and low pressure oil pump and drive motor, fuel tank (with oiler, level indicator, hook, etc.), solenoid valve, one-way throttle, unloading valve, double check valve, discharge stop valve, oil filter , High and low pressure gauge, all kinds of seat, pipe fittings, etc., if necessary, including manual pumps and a variety of valves and with power indicator, hydraulic warning lights and other electronic control devices.
        High pressure: 300bar, low pressure: 150bar
        Dimensions: 850mm × 530mm × 1040mm
        The system has a high and low pressure automatic switching device which prevents gypsum slurry from clogging in the mold cavity.
        5. Pneumatic telescopic fixture
        The use of travel-type pneumatic telescopic fixture: with a wheel of the fixture mounted on the two tracks, the car has high, low speed operation and advance and retreat, the brake positioning function. And the small frame on the lifting rails with the pneumatic telescopic fixture can adjust the speed of lifting, by the lift transmitter device control. So the car-type pneumatic telescopic fixture can be three-dimensional accurate positioning and guidance, with the other equipment through the PLC variable program controller and other components of the automatic unit.
        6. Production line automatic control system
        PLC variable program control device, by the operator near the operation of the button box and electric control cabinet and other components. The system will screw feed machine, batching system, mixer, molding machine, central hydraulic station, pneumatic telescopic fixture and other equipment, according to the production process and the work of the beat, to meet the interlocking interlocking requirements to form an organic and efficient overall , To ensure maximum product quality and productivity.

    Unique advantages

    Customization process

    Process:
        The calcined natural gypsum or chemical gypsum powder is first sent by the pneumatic pump or bucket elevator and other mechanical equipment into the plaster storage warehouse (silo with vacuum facilities, material level automatic transmission device and broken arch device, etc. ), And then into the conveyor and feeding equipment. After the metering system is measured by the electronic weighing scale through the pneumatic discharge valve into the mixer. The production water is measured by the adjustable water metering device of the batching system and also into the mixer through the pneumatic discharge valve. If necessary, add an appropriate amount of coagulant to the mixer.
    The components were homogeneously mixed by means of a strong agitation of the stirrer in a mixer, and the slurry was automatically poured into the mold cavities of the molding machine by a hydraulic reversing device. At a suitable stage of the solidification of the slurry, the hydroforming scraper mounted above the mold cavity is driven to move back and forth to scrap the upper part of the block. The central hydraulic station then drives the jacking system of the forming machine to eject the entire gypsum block from the mold. At this time in the molding machine above the pneumatic telescopic fixture will be the whole row of sandwich, lift, remove, put on the stack or car. And then transported by the forklift to the natural drying site dry, or by the car will be stacked into the tunnel kiln for artificial drying. Dry finished gypsum block after passing the inspection, you can transport, packaging for finished product storage or loading Sinotrans.

    Order online

    In order to be able to contact you in a timely manner, please be sure to fill out your contact information and demand information, you can enter your needs, such as the type of raw materials, capacity, feed size, the final product size, etc .; you can also QQ Contact our 24-hour online customer service, the ability to electromechanical - to become your satisfaction with the partners.

    • You need the product:
    • Your Name:
    • Contact information:
    • Equipment use area:
    • Demand information content:

  • 界首一中64届学子毕业54年后母校再相聚 2019-08-24
  • 韩国:关注平昌冬奥会——朝啦啦队抵达  韩方举办欢迎晚宴 2019-08-24
  • 认识【转基因的各种破坏力】,其实很简单,只需【化验员】扒开种植【转基因农作物】的【泥土】,拿到【化验室】在【显微镜】下面看一看其【泥土】里面还有没有【微生物】的 2019-08-18
  • 凤凰月报:5月高端成交活跃带动均价创新高 ——凤凰网房产上海 2019-08-15
  • 木有评论的价值,逗逗你这猴崽子。[哈哈] 2019-08-15
  • 上海二手车牌照暴涨至12万 免费新能源牌乏人问津 2019-08-06
  • 四川郎酒股份有限公司获第十二届人民企业社会责任奖年度环保奖 2019-07-21
  • 欧宝将会在今年推出全新GT概念车 2019-07-21
  • 衔接“新高考” 要求变更高 2019-07-15
  • 杨洋出演《全职高手》 直言:叶修是很多人的榜样 2019-06-09
  • “全能神”人员恶意使用难民申请滞留韩国 2019-06-08
  • 临汾“尧王杯”马拉松激情开赛 万名选手齐聚华门广场 2019-06-08
  • 回复@笑傲江湖V:七千二百多吧。 2019-06-07
  • 【理上网来·辉煌十九大】德国北威州经济部长:十九大报告表明中国有能力为世界做出更多贡献 2019-06-06
  • 办个房产证 也要惊动省委书记? 2019-06-05
  • 快乐12大师app 十一运夺金遗漏查询 时时走势图五星综合 时时彩五码单期全天计划 广东时时预测软件 分分彩后一杀2码100准 通比牛牛翻倍吗 浙江快乐十二选五开奖 118kj开奖结果118kj手机看 3分赛计划